1. APLICATIONS OF THE COATED GLOVES

1) AUTOMOTIVE INDUSTRIES

2) ELECTRONICS INDUSTRIES

3) SMALL COMPONENTS ASSEMBLY INDUSTRIES

4) AGRICULTURE & FARMING

5) FOODSTUFF INDUSTRIES

6) VEGETABLES & FRUITS HARVESTING

7) PHARMACEUTICAL INDUSTRIES FOR TABLETS

8) PACKAGING INDUSTRIES

9) GENERAL WORKING GLOVES

10) AFTER SERVICE & MAINTENANCE FIELD

11) SEMICONDUCTOR INDUSTRIES

12) PRECISION PARTS & ENGIN ASSEMBLY INDUSTRIES

13) METAL FABRICATION INDUSTRIES

14) GLASS INDUSTRIES

15) WIRING & PIPING INDUSTRIES

2. SPECIFICATION OF THE WATER BASE PU(POLYURETHANE)

1) WATER BASE PU RESIN INCLUDING ASSISTANCE AGENTS HAS VERY SPECIAL PROPERTIES AS UNDER

• 100% WATER BASE WITHOUT DMF, ORDER FREE, SOLVENT FREE, NON-TOXIC
• NEAR AT USER FRIENDLY, ENVIRMENTAL FRIENDLY & ECO FRIENDLY
• PENETRATION FREE & SAFETY PU GLOVES AGAINST TRADITIONAL SOLVENT BASEED PU COATED GLOVES
• MOVING VERY SMOOTH TO THE TOUCH, SMARTLY AND FREXIBILITY
• GIVE AN IMPRESSION OF WEARING LIKE A BARE HAND

3. MEASURING METHOD FOR FITTING THE GLOVES

※ PLEASE MAKE CHOICE THE GLOVE BETWEEN THE RIGHT HAND & LEFT HAND.

1) MEASURING PALM WIDTH OF THE GLOVE.

(1) PLACE THE GLOVE ON FLAT SURFACE & MAKE SURE THAT THE GLOVE SHOULD STRETCH & UNFOLD.

(2) PLACE A MEASURING TAPE OR CALIPER HORIZONALLY FROM A GAP BETWEEN THE THUMB & INDEX FINGER.

(3) AND MEASURE THE WIDTH ACROSS THE PALM TILL THE OPPOSITE EDGE OF THE PALM.

2) MEASURING LENGTH OF THE GLOVE.

(1) PLACE THE GLOVE ON FLAT SURFACE & MAKE SURE THAT THE GLOVE SHOULD STRETCH & UNFOLD.

(2) PLACE A MEASURING TAPE OR CALIPER VERTICALLY FROM THE EDGE OF THE CUFF TILL THE TIP OF MIDDLE FINGER.

(3) AND MEASURE THE LENGTH.

4. RAW MATERIALS FOR GLOVES COATING AND LINER MATERIALS FOR COATING GLOVES

1) POLYURETHANE(PU) COATING

• PU COATING ON THE FINE GAUGE KNITTED GLOVES OFFERS SUPERIOR PERFORMS WELL AGAINST ALCOHOLS, GREASE, ANIMAL FATS & ACIDS

2) NBR(NITRILE) COATING BY MAXI WATER SPRAY

• NBR GLOVES ARE PRODUCED USING NITRILE AND CONTAIN NO LATEX PROTEINS. THESE GLOVES HAS PERFECT RESISTANCE FOR LATEX SENSITIVE PERSON.
• THE NITRILE COATED GLOVES PROTECT THE WEARER FROM THE MOST SOLVENTS AND OILS. AND THESE GLOVES ARE GREAT FOR CUT & PUNCTURE RESISTANCE
• THESE GLOVES ARE NOT RECOMMEND FOR APPLICATION FOR KETONES & NATURAL SOLVENTS.
• NBR EXAMINATION GLOVES ARE USED AS A PART OF MEDICINAL APPLICATIONS BY FIRST RESPONDERS, RESTORATIVE WORK FORCE AND RESEARCH FACILITY STAFF, AND FOR CONSTRAINED SPRINKLE ASSURANCE IN CHEMICALS. HEAVIER NITRILE GLOVES ARE ROUTINELY USED AS A PART OF ASSEMBLING, CLEANING AND THE SUSTENANCE HANDLING INDUSTRIES.

3) NBR(NITRILE) FOAM COATING

• STOMATE NBR COATING GLOVES ABSORBS OILS THAN NORMAL GLOSSY COATING GLOVES. THESE GLOVES PROVIDES EXCELLENT GRIP POWER AGAINST OILY & GREASY APPLICATIONS WHILE MAINTANING THE CUT, SLASH & ABRASION RESISTANCE OF A NORMAL GLOSSY COATING GLOVES.
• THE NBR FOAMED COATING GLOVES ABSORBS OIL & GREASE TO ENSURE A FIRM GRIP.

4) NATURAL LATEX COATING

• TOUGH CHARACTERISTIC ELASTIC GLOVES ARE USUALLY UTILIZED AS A PART OF MECANICAL APPLICATIOND, FOR CLEANING, FOOD PROCESSING SND HANDLING. THEY OFFER AN ABNORMAL STATE OF ASSURANCE AGAINST CUTS AND OILS

5) NEOPRENE RUBBER COATING

• NEOPRENE COATED GLOVES OFFERS PREVALENT ASSURANCE AGAINST OILS, ACIDS, SLOVENTS AND BURNING CHEMICALA. BUT IS TO SOME DEGREE LESS VIABLE AGAINST SCRAPED AREA & CUTS THAN EITHER REGULAR ELASTIC OR NITRILE

6) LINER WITH POLYESTER/COTTON BLENDED

• VARIED COMBINATIONES OF YARN BLENDS INCREASE MACHINEKNIT STRENGTH & DURABILITY, WHILE STILL ALLOWING FOR WORKER DEXTERITY, RUBBER COATED GLOVES, NITRILE OR OTHER SUBSTANCES TO IMPROVE GRIP POWER AND LONGEVITY

7) LINER WITH KEVLAR

• KEVLAR IS ONE OF THE STRONGEST OF ALL FIBER. THIS ARAMID OFFERS EXCELLENT CUT RESISTANCE AND HEAT INSULATION. BUT KEVLAR GLOVES ARE VERY POOR FROM ANTIABRASION.

8) LINER WITH UHMWHDPE

• THIS GLOVES HAS VERY HIGH CUT RESISTANCE (CUT 5; LEVEL) & VERY FLERXIBILITY. MAINLY THESE GLOVES MAKE BY PU COATING

9) LINER WITH WOOL

• A NATURAL FIBER WHICH IS SUBTLE, SOFT & COMFORTABLE
• WOOL HAS EXCELLENT HEAT INSULATION & HAS NATURAL FLAME RESISTANCE. WOOL ALSO PROVIDES GOOD DEXTERITY WHEN USED AS A LINER IN CONJECTION WITH MATERIALS

10) LINER WITH COTTON

• A NATURAL FIBER THAT IS EXCEPTIONALLY SUBTLE, SOFT & COMFORTABLE. COTTON ALSO EXCELS IN ABSORBING PERSPIRATION & IS ALSO BREATHABLE. INSULATION POWER IS WELL

11) LINER WITH ACRYLIC

• A SYNTHETIC FIBER THAT HELPS PROVIDE INSULATION FROM COLD TEMPERATURES AND IS ALSO QUICK DRYING

12) LINER WITH POLYESTER

• A DURABLE, SYNTHETIC FIBER THAT IS RESISTANT TO ABRASION POWER & TEARING WITH LOW MOISTURE ABSORBENCY THAT RESISTS SHRINKAGE DURING LAUNDERING

13) LINER WITH NYLON

• NYLON IS A SYNTHETIC MATERIAL, LOW LINTING, HIGH TENSILE STRENGTH FIBER THAT OFFERS EXCELLENT DEXTERITY & TECTILE SENSITIVITY

5. KIND OF LINER

1) COTTON / HOSIERY / NYLON / POLYESTER / DYNEEMA / KEVLA / CUT3 / CUT5.

(1)MAIN YARNS FOR 13 GAUGE CUT LEVEL 3 GLOVES / 13 GAUGE CUT LEVEL 5 GLOVES

• UHMWPE (ULTRA-HIGH MOLECULAR WEIGHT PE) YARN
• KEVLAR FIBER YARN
• GLASS FIBER YARN
• SEAMLESS ARAMID YARN
• STAINLESS STEEL WIRE

(2) EXCELLENT CUT AND ABRASION RESISTANCE WITH OUTSTANDING TENSILE STRENGTH

2) COATING MATERIALS; NBR(NITRILE) OR NATURAL LATEX

3) COATING METHOD; PALM / HALF / FULL / DOUBLE / FOAM / GLOSSY / CRINKLE / MGP

6. COATING GLOVES

• 

  NITRILE(NBR) DELIGHT

• 

  NITRILE(NBR) MGP

• 

  NITRILE(NBR) MGP

7. NEW NBR MGP MOULD FOR PALM & HALF COATING.

• 

  NEW NBR MGP MOULD

8. COMBINED TYPE MGP MC

• 

  Combinded type Mgp mc