THERE ARE SEVERAL TYPES DIPPING MACHINES IN ACCORDANCE WITH THE LINERS, COATING MATERIAL & COATING METHODS.

1) KIND OF LINER; COTTON / HOSIERY / NYLON / POLYESTER / DYNEEMA / KEVLA / CUT3 / CUT5.

(1) MAIN YARNS FOR 13 GAUGE CUT LEVEL 3 GLOVES / 13 GAUGE CUT LEVEL 5 GLOVES;

• UHMWPE (ULTRA-HIGH MOLECULAR WEIGHT PE) YARN
• KEVLAR FIBER YARN
• GLASS FIBER YARN
• SEAMLESS ARAMID YARN
• STAINLESS STEEL WIRE

(2) EXCELLENT CUT AND ABRASION RESISTANCE WITH OUTSTANDING TENSILE STRENGTH

2) COATING MATERIALS; NBR(NITRATE) OR NATURAL LATEX

3) COATING METHOD; PALM / HALF / FULL / DOUBLE / FOAM / GLOSSY / CRINKLE / MICRO-SANDY

NBR GENERAL COATING & MICRO-SANDY COATING MACHINE.

1. MACHINE TYPE; SPECIAL DESIGNED VERTICAL TYPE DIPPING MACHINE

1) MANUFACTURING PROCESS FOR PRODUCING MGP GLOVES.

0. MeOH PRETREATMENT FOR PROTECTION PERMEATION NBR RESIN INTO THE LINERS)⇒⇒⇒⇒REMAINING MeOH SPILLING⇒⇒⇒⇒NBR COATING(PALM OR HALF PARTS)⇒⇒⇒⇒ REMAINING NBR RESIN SPILLING⇒⇒⇒⇒SALT POWDER SPREADING ON THE PART OF NBR COATING⇒⇒⇒⇒SHAKING SALT POWDER FROM THE COATING GLOVES⇒⇒⇒⇒ MOVEMENT TOWARD THE SIMPLE TYPE PRE DRYING OVEN ON THE GROUND FLOOR⇒⇒⇒⇒ MOVEMENT TOWARD 1st CHEMICAL LEACHING WATER TANKS ON THE GROUND FLOOR⇒⇒⇒⇒2nd CHEMICAL LEACHING(SMELL/CHEMICAL) OF THE COATING GLOVES ON 2nd PLATFORM⇒⇒⇒⇒MOVEMENT TOWARD 3rd CHEMICAL LEACHING WATER TANKS ON THE 3rd PLATFORM⇒⇒⇒⇒MOVEMENT THE MOULD BARS FROM 1st DRYING CHAMBER TO 3rd DRYING CHAMBER FOR DRYING THE COATING GLOVES⇒⇒⇒⇒GLOVES AUTOMATIC TAKE OUT⇒⇒⇒MOULD COOLING⇒⇒⇒ LINERS FITTING

2) POINT OF ATTRACTIONS

• THIS TYPE DIPPING MACHINE CAN MAKE COATING GLOVES AS UNDER.
• PALM / HALF / FULL / DOUBLE / FOAM / GLOSSY / CRINKLE / MICRO-SANDY FINISHING

(1) IF REQUESTED BY THE CUSTOMER, THIS TYPE MICRO-SANDY DIPPING MACHINE CAN ALSO PRODUCE PALM, HALF COATING GLOVES INCLUDING FOAM COATING AND GLOSSY COATING GLOVES.

(2) CURRENTLY, WE SUPPLY NBR MICRO-SANDY COATING MACHINE, WHICH IS DESIGNED AS 2 KINDS OF VERTICAL TYPE ACCORDING TO CUSTOMER’S FACTORY SIZE AND KINDS OF COATING GLOVES.

• ONE IS A 45 m LENGTH NBR MGP COATING MACHINE. THIS MACHINE CAN PRODUCE PALM GLOVES AND HALF GLOVES WITH MICRO-SANDY COATING AND GLOSSY COATING.
• THE OTHER IS A 59m LENGTH NBR MICRO-SANDY COATING MACHINE. THIS MACHINE CAN PRODUCE PALM GLOVES AND HALF GLOVES INCLUDE MICRO-SANDY COATING, FOAM COATING AND GLOSSY COATING TOO.

3) TYPE OF LINER; NAPPY / POLYESTER / SPANDEX / HPPE / NYLON / DYNEEMA / UHMWPE

4) THIS TYPE MICRO-SANDY COATING GLOVES ARE USING ROCK SALT POWDER FOR INCREASING GRIP POWER. BUT ALL KINDS OF SALT INGREDIENT HAVE THE EFFECT OF CORRODING MOST OF STEEL AND COMMON ALUMINIUM. IT MAY ALSO DAMAGE THE STEEL FRAMES, GLOVE MOULDS AND ELECTRIC PARTS OF THE DIPPING MACHINE

5) WE HAVE DEVELOPED A METHOD OF PRODUCING MICRO-FINISHING GLOVES USING A NEW SODIUM SULFATE POWDER THAT IS LESS IMPACTFUL THAN SALT POWDER WHICH CORRODES ALL STEEL FRAME PARTS.

6) MICRO-SANDY DIPPING MACHINE’S SPECIFICATION

(1) WATER HEATING & GLOVES DRYING METHOD; AVAILABLE DISEL / GAS / ELECTREIC / STEAM

(2) LEACHING WATER TANKS; 3 zones/ DRYING CHAMBER; 3 zones

(3) TOTAL MOULD QUANTITY; 1525 pairs

(4) MOULD BAR QUANTITY; 305 bars / 5 pairs ON A MOULD BAR

(5) APP. OUTPUT CAPACITY; 11 pairs/minute

(6) MACHINE DIMENSION (L * W * H); 45 m * 2.3 m * 4.35 m

(7) SUPERVISORY CCTV & MONITORS; 4 CCTV & 4 CHANNELS MONITOR

• GLOVE TAKE OUT POSITION; 1 set
• NBR DIPPING POSITION; 2 sets
• SALT POWDER SCATTERING POSITION; 1 sets

2. MICRO-SANDY(MICRO FINISHING/MICRO FOAM) COATING GLOVES.

• 

  MICRO-SANDY FINISHING GLOVES

• 

  MICRO-SANDY FINISHING GLOVES

• 

  MICRO-SANDY FINISHING GLOVES

• 

  MICRO-SANDY FINISHING GLOVES

3. GLOVES MICRO-SANDY COATING MACHINE

• 

  TAKEOUT

• 

  FULL COATING

• 

  DRYING

4. VIDEO CLIP OF MICRO-SANDY COATING MACHINE

• NBR MICRO-SANDY

• SALT SPRAY