THERE ARE SEVERAL TYPES DIPPING MACHINES IN ACCORDANCE WITH THE LINERS, COATING MATERIAL & COATING METHODS.

1) KIND OF LINER; COTTON/ NYLON/POLYESTER/ACRYLIC TERRY/ACRYLIC FIBER

(1) MAIN YARNS FOR 10 GAUGE YARN / 13 GAUGE YARN.

• IT IS VERY IMPORTANT TO MAKE COVERING OF EACH YARNS FOR PRODUCING HIGH QUALITY COATING GLOVES

(2) CRINKLE FINISH GLOVES PROVIDE GREAT GRIP AND ABRASION RESISTANCE AND NICE AT ANTI-OXIDATION.

(3) IN CASE OF BREATHABLE FOAM LATEX COATING GLOVES OFFERS A CONFORTABLE FIT AND HIGH LEVEL OF DEXTERITY. AND IT IS A SUPERIOR GRIP POWER IN WET AND OILY CONDITION.

1. VERTICAL(BUTTERFLY) TYPE DIPPING MACHINE--------LATEX COATING/NBR COATING

1) KIND OF KNITTED LINER; COTTON/NYLON/POLYESTER/ACRYLIC TERRY/ ACRYLIC FIBER

2) COATING MATERIAL; NATURAL LATEX COATING / NITRILE(NBR) COATING

3) KIND OF COATING; LATEX CRINKLE // NBR CRINKLE COATING & FOAM COATING & NBR GLOSSY COATING.

• IN CASE OF NBR COATING GLOVES(FOAM COATING/GLOSSY COATING/WRINKLE COATING), ALL OF GLOVE LINERS HAVE TO PRE-TREAT BY METHANOL(MeOH) BEFORE NBR COATING FOR PREVENTION PERMEATION NBR RESIN INTO THE GLOVE LINERS.
• SO, THIS MACHINE IS INSTALLED MeOH PRETREATMENT TRAY FOR DIPPING THE LINERS.

4) COATING POSITION; PALM COATING / HALF COATING

5) GAS HEATING SYSTEM FOR LEACHING WATER TANKS AND DRYING CHAMBERS.

• GAS CONSUMPTION; 15~~26 kgs/hr

6) LATEX AND NBR MIXING UNITS / LATEX AND NBR FEEDING UNITS.

7) INSTALLATION & COMMISSIONING CHARGE OF THE COMPLETE LINE.

8) TECHICAL TRANSFER AND TRAINING CHARGE AT PLAMA LAP FOR 15~~20 DAYS.

9) COATING MACHINE TYPE; VERTICAL TYPE

2. LATEX OR NBR(NITRATE) COATING MACHINE FOR CRINKLE SHAPE

GLOVE LINERS FITTING →→→→1 st GLOVES PRE-HEATING→→→→PRETREATMENT BY METHANOL→→→→1 st NORMAL LATEX (OR NBR) COATING(FULL COATING) →→→→PASSING AN INTERVAL→→→→2 nd WRINKLE TREATMENT BY NITRIC ACID →→→→2 nd GLOVES PRE-HEATING→→→→GLOVES WASHING BY THE SPRAY WATER FOR REMOVING SMELL→→→→ PASSING AN INTERVAL FOR DROPPING EXCESSIVELY WATER→→→→ COATED GLOVES DRYING→→→→GLOVES TAKE OUT.

• THIS COATING MACHINE IS DESIGNED FOR PRODUCE THE LATEX WRINKLE & LATEX GLOSSY GLOVES.
• THIS COATING MACHINE IS DESIGNED FOR PRODUCE THE NBR WRINKLE GLOVES & NBR FOAM GLOVES & NBR GLOSSY GLOVES
• LATEX WRINKLE SHAPE GLOVES ARE BETTER ELASTICITY THAN NBR WRINKLE SHAPE GLOVES.

3. GLOVE MOULD

1) THE GLOVE MOULDS ARE MADE BY ALLOYED SPECIAL METALS. AND THIS GLOVE MOULDS ARE DULLY COATED BY SPECIAL TEFLON MATERIAL.

2) THERE IS 7 KINDS OF GLOVE MOULDS SIZE; XS / S / M / L / XL / 2XL / 3 XL

3) TOTAL MOULD QUANTITY; 1720 pairs

4. KNITTED GLOVE LINERS

KNITTED GLOVE LINERS AND LINER GAUGE ARE VERY IMPORTANT FOR HIGH QUALITY LATEX COATING. BASICALLY, THE COTTON INCLUDING NYLON YARN IS AVAIABLE LATEX COATING. BUT WE WOULD LIKE TO RECOMMEND THAT MAXIMUM QUANTITY OF NYLON YARN IS UNDER 15% OF TOTAL COTTON YARN. MOREOVER, THE COTTON GLOVE LINERS SHOULD MAKE KNITTING OVER 13 GAUGE. BECAUSE A LOOSE KNITTED LINERS THAN 13 GAUGE MAY PERMEATE THE LATEX RESIN INTO THE GLOVE LINERS.

5. RAW MATERIAL MIXING & GRINDING UNIT FOR LATEX

(1) RAW MATERIALS MIXING GRINDER FOR SULFUR / ZINC / CALCIUM CARBONATE/ OTHER ADDITIVES

(2) BLENDING OF LATEX RESIN + RAW MATERIALS + PIGMENT

6. COMPOSITION OF NATURAL LATEX

(1) NATURAL LATEX

• PACKING DIMENSION (1 DRUM); 200 ltr VOLUME
• COMPOSITION OF 1 DRUM LATEX-----60 % SOLID LATEX (120 ltrs) + 40 % AMMONIA & OTHERS (80 ltrs)

(2) ADDITIVES

• SULFUR / ZINC / CALCIUM CARBONATE/ OTHER ADDITIVES (DETAIL PERCETAGE AND MIXING KNOW-HOW OF EACH ADDITIVES WILL BE INFORM AND TRANSFER AS SOON AS SIGING THE CONTRACT)

7. THE CONSUMPTION OF LATEX ON A PAIR OF 13 GAUGE GLOVES(APPROX)

(1) THIS IS A DATA FOR SHOWING UNDER THE BASE OF KOREAN LATEX GLOVE MAKERS.

0. WEIGHT OF 13 GAUGE GLOVE LINER ; 32 ~~34 grs/1 pairs

0. CONSUMPTION OF THE LATEX ON 13 GAUGE GLOVE

※CONSUMPTION OF LATEX RESIN MAY VERY VARIOUS ACCORDING TO THE KIND OF GLOVE LINER AND LATEX COATING COMPANIES

8. THE CONSUMPTION OF METHANOL ON A PAIR OF 13 GAUGE NBR GLOVES(APPROX)

(1) METHANOL CONSUMPTION PER 1 PAIR; 20 grs

• LATEX PALM COATING; 22 ~~24 grs/1 pair
• LATEX HALF COATING; 26 ~~28 grs/1 pair

1) CRINKLE & FOAM DIPPING MACHINE’S SPECIFICATION;

(1) WATER HEATING & GLOVES DRYING METHOD; AVAILABLE DISEL / GAS / ELECTREIC / STEAM

(2) LEACHING WATER TANKS; 3 zones/ DRYING CHAMBER; 2 zones

(3) TOTAL MOULD QUANTITY; 3200 pairs

(4) MOULD BAR QUANTITY; 800 bars / 4 pairs ON A MOULD BAR

(5) APP. OUTPUT CAPACITY; 12 pairs/45 second~50 second

• 1 FRAME BODY IS INSTALLED 3 MOULD BARS
• 1 MOULD BAR IS INSTALLED 4 pairs MOULDS

(6) MACHINE DIMENSION (L * W * H); 43 m * 6.26 m * 5.8 m

• NBR COATING SECTION (L * W * H); 24 m *2.94 m * 3.1 m
• LEACHING & DRYING SECTION (L * W * H); 43 m * 2.54 m * 5.8 m
• DISTANCE BETWEEN COATING SECTION AND LEACHING/DRYING SECTION; 0.775 m

9. CRINKLE COATING GLOVES

• 

  DOT GLOVE

• 

  DOT GLOVE

• 

  CRINKLE GLOVE

• 

  CRINKLE GLOVE

• 

  CRINKLE GLOVE

• 

  CRINKLE GLOVE

• 

  CRINKLE GLOVE

• 

  CRINKLE GLOVE

• 

  CRINKLE GLOVE

• 

  CRINKLE GLOVE

• 

  CRINKLE GLOVE

• 

  CRINKLE GLOVE

• 

  CRINKLE GLOVE

• 

  DOT GLOVE

• 

  DOT GLOVE

• 

  DOT GLOVE

• 

  DOT GLOVE

• 

  DOT GLOVE

• 

  NBR CRINKLE

• 

  PU GLOVE

10. CRINKLE & FOAM COATING MACHINE

• 

  CRINKLE MC

• 

  CRINLE MC

• 

  CROTCH REINFORCEMENT

• 

  CROTCH REINFORCEMENT

• 

  DOT PRINTING MC

11. MICRO-SANDY MC VIDEO

• CRINKLE MC