1. MAJOR SPECIFICATION.

1) MODEL. PMEHY-T75-APS

2) APPLICABLE RESIN RECYCLED PET FLAKES & VIRGIN “A”PET / “G” PET RESIN /IV --0.65-0.8/PELLET DIAMETER; ø8mm)

3) DESIGNED EXTRUDING CAPACITY 400kgs/HOUR(MAX.)

• NOMINAL GUARANTEED PRODUCTION 300KGS/HR
• LINE SPEED 20-50m/MINUTE(BY THICKNESS & DIAMETER)

0. 0.18 mm THICKNESS40-50m/MINUTE( USED FOR DRIED LAVER)

0. 1.2 mm THICKNESS 7-10m /MINUTE(USED FOR CUP)

4) PET SHEET SPECIFICATION

• THICKNESS 0.13-1.2mm(NORMAL THICKNESS)
  1.5mm(SPECIAL THICKNESS ; SPECIAL OPTION)
• WIDTH 900mm-1200mm(NORMAL SIZE)
  1500mm(SPECIAL OPTION; INCREASE EXTRUDER)
• WINDING DIAMETER ø800mm-ø1200mm

5) HEIGHT OF THE MACHINE CENTER1300mm

6) UTILITIES

(1) ELECTRIC POWER SOURCE220(380V) * 50 HZ * 3ø

• POWER DIFFERENCE +/- 10% LESS THAN
• FREQUENCY DIFFERENCE +/- 1% LESS THAN

(2) TOTAL POWER CAPACITY370 KW

(3) COOLING WATER

• QUALITY NATURAL INDUSTRIAL WATER
• COOLING WATER CONSUMPTION 120 ltr/minute(APPROX.)
• TEMPERATURE UNDER 30c

(4) COMPRESSED AIR

• AIR PRESSURE 6 - 7 kgf/cm2
• AIR CONSUMPTION 80 ltr/minute(APPROX.)

7) MACHINE COLOR ACCORDING TO THE REQUEST OF THE BUYER

8) FACTORY TEMP. & HUMIDITY 0-40c/MAX. 80%

9) MACHINE DIMENSION( L * W* H) 20,900 * 4,200 * 5,290mm

2. TECHNICAL SPECIFICATION.

1) MAIN EXTRUDER UNIT WITH ø75 mm FOR RECYCLING PET MATERIAL

(1) GEAR BOX

• TYPE HORIZONTAL TYPE WITH VENT
• MATERIAL OF GEAR BOX CASTING IRON(GC 20_
• TYPE OF GEAR HELICAL GEAR
• MATERIAL OF GEAR CHROME MOLYBDENUM STEEL(SCM 440)
• SPEED CHANGE METHOD NON-STOP VARIABLE
• LUBRICATION METHOD OIL QUENCHING

(2) THROAT AND HOPPER DRYER

• TYPE OF THROAT WATER JACKET TYPE
• MATERIAL OF THROAT CASTING IRON(GC 20)
• TYPE OF HOPPER CIRCULAR TYPE
• HOPPER CAPACITY 500 kg/BATCH
• ACCESSARIES SIGHT GLASS AND SHUTTER
• MATERIAL TRANSFER SYSTEM SCREW TYPE
• VACUUN PUMP 7.5 kw

(3) SCREW

• TYPE TWIN SEGMENT TYPE
• DIAMETER OF OUTSIDE ø74.5 mm
• L/D 32;1
• ROTATION DIRECTION SAME ROTATION
• MATERIAL NITRIDING STEEL(SACM 645)
• SURFACE TREATMENT HIGH CHROME PLATED AFTER NITRIDING HEAT-TREATMENT(HS - 90)

(4) BARREL

• INNER DIAMETER ø75 mm
• MATERIAL NITRIDING STEEL(SACM 645)
• INNER MATERIAL SURFACE HEAT TREATMENT BY NITRIDING AFTER HONING(HS 90-95)
• TEMP. CONTROL
• CONTROL SECTION 7 ZONES
• BARREL6 ZONES
• ADAPTER1 ZONE
• TYPE OF HEATER AL. CASTING HEATER
• PRE-HEATING METHOD ELECTRIC RESISTANCE METHOD
• PRE-HEATER CAPACITY 51.2 KW(APPROX.)
• COOLING METHOD WATER SYSTEM WITH REGULATOR

(5) FRAME AND DRIVING UNIT

• STRUCTURECHANNEL, STEEL PLATE WELDING
• MAIN MOTOR DC MOTOR 132 KW* 1750 RPM
• DRIVING METHOD 5V - BELT